This series of motors can use accumulator or rectified direct current (ripple coefficient not more than 8%) as power supply, which is suitable for general drive and mechanical equipment as drive. The motors have the following characteristics:

 

1. The method of changing the power supply voltage to adjust the speed can use a voltage lower than the technical index to obtain a lower speed.

2. The motor can be positive and reverse. Generally, the red wire is connected to the positive pole and the black wire is connected to the negative pole. If you need to rotate in the opposite direction, just connect the red wire to the negative pole and the black wire to the positive pole.

 

Service conditions:

Altitude: no more than 2500m

Ambient temperature: not more than + 40 ℃, minimum not less than - 10 ℃

Relative humidity: not more than 95% at 20 ± 5 ℃